Share this content on Facebook!
7 Dec 2015

Do you need to make your own music? Maybe you have thought of getting involved in instrument making? Homemade music can be a great thing to be happy with, making instruments with your own personal two hands. But if you're good along with your hands, or at least can handle tools moderately well, you continue to need more than that. There are many mathematical tricks to knowing how some instruments really should be put together precisely so that you can have it produce the right sounds, and properly so. Let's start with a simple formula for woodwinds (and some tonic, tubular type percussion instruments), including for flute making, then one for stringed instruments, for example if you were to make guitar types. Reduce costs is as follows... - Tyga Type Beat 2017

For woodwind instrument making, by way of example, flute making, it helps to understand the length of a note's wavelength (or perhaps when making instruments from a woodwind type) in order to make your own personal music with precise tuning. With the distance sound travels per second, 13526.5 inches (divide by 2.54 for centimeters), and divide the dpi by the frequency in the note, you will have the linear measurement of this note's wavelength. For example, the regularity of the note "A" is 440 Hertz. This would give a wavelength about 30 ¾ inches long. Your body of an open ended flute, like a side-blown transverse flute, is a half-wavelength long. By using this formula, you can also find the placements from the fingering holes in accordance with their notes, and after that begin to make your own music. This will also work with some tubular percussion instruments, for instance a set of chromatic drums, that's another fun project of homemade music.

For stringed instrument making, if you make guitar type instruments, you will find there's mathematical formula to find the precise placements from the frets along the neck with the instrument. This is known as the "18 rule". Actually, the precise number is 17.8167942, and this is the main number used in calculating where frets they fit. Here's where the homemade music fun starts; study the distance from the nut (a.k.a. "zero fret") with the head stock of the instrument, to the bridge evidently of the body. Take that measurement and divide by 17.8167942 - this will give you the distance relating to the nut and the first fret. Now measure from that first fret for the bridge, and divide that by 17.8167942, giving you the distance between the first fret and the next, and repeat until all fret placements have been located. These and other mathematical formulas are the needs to make your own music - remember these, and instrument making can be a breeze! - Tyga Type Beat 2017


There isn't any comment in this page yet!

Do you want to be the first commenter?

New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: